Home Ups

Sine Wave Home UPS

Features

Olympus Power has wide range of Home UPS which are available for every application. The Energy Efficient Sine Wave Technology used enhances the life of the battery and minimum effort has to be put for maintenance. This highly compact power packed UPS system provides 100% pure sine wave power which runs all appliances and at a reasonable price. The moment the power fails the load will be switched over to the output of the inverter.

Salient Features

• Micro Controller/DSP Based smart controller design
• Pure Sine Wave Output
• Electronic Overload and Short Circuit Protection
• Easily Serviceable
• Auto Reset Feature
• Mains Input Voltage Range Selection
• Multi Stage Charging
• Audio Visual Indications (Status & Fault)

Specifications

SI1024

Type	SINE WAVE
Models	SI1024
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	1000
Output Watt Capacity (watts)	800
DC System Voltage (VDC)	24
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	341 X 210 X 350
Cabinet Weight (kg)	14.32
Shipping Dimensions(HxWxL)mm	205 X 500 X 445
Shipping Weight (kg)	15.2
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	2
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI312

Type	SINE WAVE
Models	SI312
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	300
Output Watt Capacity (watts)	240
DC System Voltage (VDC)	12
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	130 X 250 X 290
Cabinet Weight (kg)	5.86
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	6.74
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	1
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI612

Type	SINE WAVE
Models	SI612
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	650
Output Watt Capacity (watts)	480
DC System Voltage (VDC)	12
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	130 X 250 X 290
Cabinet Weight (kg)	8.94
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	9.82
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	1
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI812

Type	SINE WAVE
Models	SI812
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	850
Output Watt Capacity (watts)	640
DC System Voltage (VDC)	12
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	130 X 250 X 290
Cabinet Weight (kg)	10.8
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	11.7
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	1
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI1524

Type	SINE WAVE
Models	SI1524
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	1500
Output Watt Capacity (watts)	1200
DC System Voltage (VDC)	24
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	341 X 210 X 350
Cabinet Weight (kg)	16
Shipping Dimensions(HxWxL)mm	205 X 500 X 445
Shipping Weight (kg)	16.88
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	2
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI1536

Type	SINE WAVE
Models	SI1536
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	1500
Output Watt Capacity (watts)	1200
DC System Voltage (VDC)	36
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	341 X 210 X 350
Cabinet Weight (kg)	16
Shipping Dimensions(HxWxL)mm	205 X 500 X 445
Shipping Weight (kg)	16.88
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	3
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI2024

Type	SINE WAVE
Models	SI2024
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	2000
Output Watt Capacity (watts)	1600
DC System Voltage (VDC)	24
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 352
Cabinet Weight (kg)	26.9
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	28.02
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	2
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI2036

Type	SINE WAVE
Models	SI2036
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	2000
Output Watt Capacity (watts)	1600
DC System Voltage (VDC)	36
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 350
Cabinet Weight (kg)	26.9
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	28.02
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	3
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI2048

Type	SINE WAVE
Models	SI2048
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	2000
Output Watt Capacity (watts)	1600
DC System Voltage (VDC)	48
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 350
Cabinet Weight (kg)	26.9
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	28.02
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	4
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI2536

Type	SINE WAVE
Models	SI2536
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	2500
Output Watt Capacity (watts)	2000
DC System Voltage (VDC)	36
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 350
Cabinet Weight (kg)	26.9
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	28.02
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	3
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI2548

Type	SINE WAVE
Models	SI2548
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	2500
Output Watt Capacity (watts)	2000
DC System Voltage (VDC)	48
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 350
Cabinet Weight (kg)	26.9
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	28.02
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	4
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI3048

Type	SINE WAVE
Models	SI3048
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	3000
Output Watt Capacity (watts)	2400
DC System Voltage (VDC)	48
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 350
Cabinet Weight (kg)	31.98
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	33.1
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	4
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Sine Wave Home UPS: SI3548

Type	SINE WAVE
Models	SI3548
INPUT
Input Voltage Range	100V ~ 300V(Wide input voltage range)
	180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported	220V AC , 50Hz
Input connection type	Hard Wire
BATTERY Full Load Runtime (minutes)	Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA)	3500
Output Watt Capacity (watts)	2800
DC System Voltage (VDC)	48
Output Voltage	220V ±5%
Frequency Compatibility	50Hz ±2%
Load PF Range	0.8 Lagging
Load Capacity	>110% faulty after 300ms
Phases	1Phase – 3 Wire (L.N.E)
Output AC waveform	Pure Sine Wave
Efficiency	> 88%
GENERAL
LCD / LEDs Indications	UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms	Audible alarm indicates power failure and overload conditions
Switches	1)Switch control off/on power status
	2)Switch for mains input voltage range
	3)Switch to select the maximum charging voltage
Protection	> 300% Load (with manual reset function)
Cooling Method	Forced air cooled
Transfer time	Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm	352 X 225 X 350
Cabinet Weight (kg)	31.98
Shipping Dimensions(HxWxL)mm	200 X 320 X 400
Shipping Weight (kg)	33.1
Housing Material	Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range	0¡C to 50¡C
Relative Humidity	95% (non-condensing)
Degree of Protection	IP 20
BATTERY
No of Battery	4
Battery Charging Profile(Boost /Foat)	Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge)	10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)	Cold – start operation supported
CERTIFICATIONS
Quality Certifications	ISO 9001:2008
WARRANTY
Product Warranty Period	1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.